No Products in the Cart
This handy little tray is the perfect decal assistant! The main tray features a sponge material where you can set your water-transfer decals. The moisture contained in the special sponge will prevent your decals from drying for a long time, thereby reducing application errors as it minimizes the loss in the adhesive on the decals. The tray allows you to keep the adhesive strength of your decals even if you're working with multiple decals at once, and don't apply some of them for 20-30 minutes. (It can hold decals up to 60 x 70mm in size. If you are concerned about stickiness, please use an adhesive and softening agent together with the decal.) The tray features an area to brush away your paper scraps, and it comes with a pair of tweezers and curved scissors specially designed for working with decals!
[How to use]
1) With the sponge tray lifted, place the sponge on the sponge tray and attach the top cover.
2) Lower the sponge tray and put water or lukewarm water to the line inside the tray (main body) until the sponge completely absorbs moisture. (Please sometimes raise the sponge tray and check the condition.)
3) Place the necessary decals slowly on the sponge tray for a few seconds to several tens of seconds. (Time varies depending on the size and type of decal to be used.)
4) Raise the sponge tray upwards and use the included tweezers to perform the decal application work.
Tray (main unit): Please rinse thoroughly after dumping out any water, then wipe dry.
Sponge: Please remove from the tray, squeeze into the water, then dry and save. (If you keep in wet condition, it may develop mold). When the sponge dries the original size becomes smaller and the shape becomes bent, but it is not a defective product.
Tweezers: There is a possibility that the decal adhesive is stuck to it, so wipe it lightly and then dry it. When storing the tweezers in the tray, please store the tweezers with the horizontal bars downward.
Decal tray: about 80mm x 177mm x 32mm
Tweezers: approx 13mm x 73mm x 7mm
Curved Scissors: About 65mm x 142mm x 10mm
Decal tray, tweezers: ABS
Sponge: PVA Sponge